Advantages
1.Full enclosed protective cover,Guaranteeing the separation of operator and machine,Dust proof Environmental
2. Carbon steel plate welding, structural stability, high temperature annealing
3. Five-axis center finishing, high strength and good rigidity
4. Integral cast aluminum beam, light weight, corrosion resistance, oxidation resistance, low density
5. Automatic focus adjustment, no manual
Characteristics
1.Stability and reliability of light path system and control system.
2.Imported original fiber lasers,high and stable function,lifespan is over 100000 hours.
3.Higher cutting quality and efficiency ,cutting speed is up to 80m/min with appearance and beautiful cutting edge.
4.German high performance reducer,gear and rack;Japanese guide and all screw.
5.Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed, it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.
Performance characteristics:
1) The closed Fiber Laser Cutting Machine has low cost and consumes less power,it can blow air to cut all kinds of metal sheets
2) High performance, imported fiber laser, stable performance, long service life.
3) High speed, high efficiency, up to 100 meters per minute.
4) Lasers are maintenance-free.
5) The cutting quality is good, the deformation is small, the appearance is smooth and beautiful.
6) The use of imported guide transmission mechanism and servo motor, cutting precision.
7) Can design any kind of graph or text to cut at will, the operation is simple, flexible, convenient.
Type | CP4025 |
Effective cutting width mm | 2500 |
Effective cutting Length mm | 4000 |
Range of vertical stroke mm | 0-80 |
Input power | AC380V/50Hz;AC220V/50Hz |
Cutting thickness mm | accroding to laser power |
Cutting speed | 21000 (1000W/stainless δ1mm) |
Idle speed mm/mi | 100000 |
Maximum Acceleration (G) | 1.2 |
Position repeat accuracy mm | ±0.05 |
Drive mode | Precision rack bilateral drive |
Laser wavelength nm | 1080 |
Cooling mode | water-cooling |
Environmental temperature | 5-35℃ |
Cutting material | Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet |