VIDEO
Features of Fiber Laser Cutting Machine :
1. Ultra-low cost, the laser consumes less than 10 kWh per hour; it can blow air to cut various metal sheets.
2. High performance, imported original fiber laser, stable performance, service life up to 100,000 hours
3. High speed, high efficiency, cutting sheet speed up to 10 meters per minute
4. The laser is maintenance-free; other consumables are also low in consumption.
5. The cutting edge has good quality, small deformation, flat appearance and beautiful appearance; it can be processed by steel plate, stainless steel, aluminum alloy plate and hard alloy without any influence on the hardness of the material to be cut, no matter what kind of hardness, Non-deformable cutting is possible. Cutting surface finish is high, cutting does not require two-line processing
6. Adopting imported guide transmission mechanism and servo motor, the cutting precision is high. Metal and some non-metallic materials can be processed.
7. Freely design various graphics or text for instant cutting, easy to operate, flexible and convenient
Technical specifications
Type
CE3015
CE4015
CE6015
Effective Cutting Width (mm)
1500
1500
1500
Effective Cutting Length (mm)
3000
4000
6000
Lift(mm)
0-80
Input power
AC380V/50Hz;AC220V/50Hz
Cutting thickness (mm)
Stainless 6mm, carbon steel 14mm
Cutting speed ( mm/min )
28000 (15000W/δ1mm Stainless )
Idle speed ( mm/min )
100000
Max acceleration (G)
1.2
Position repeat accuracy
±0.05
Drive mode
Precision rack bilateral drive
Laser wavelength(nm)
1080
cooling mode
water-cooling
Environment temperature
5-35℃
Cutting material
Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet
Laser cutting is the laser beam emitted from a laser that is focused into a high power density laser beam via an optical path system. The laser beam is irradiated onto the surface of the workpiece to bring the workpiece to a melting point or boiling point, while the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. As the beam moves relative to the workpiece, the material is finally slit, thereby achieving the purpose of cutting.
Laser cutting processing replaces traditional mechanical knives with invisible beams. It has high precision, fast cutting, is not limited to cutting pattern limitation, saves materials by automatic typesetting, smooth cuts, low processing cost, etc., and will gradually improve or replace Traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the workpiece, and it will not scratch the surface of the workpiece during operation; the laser cutting speed is fast, the slit is smooth and flat, and generally no subsequent processing is required; the cutting heat affected zone is small, the sheet deformation is small, and the slit is narrow ( 0.1mm~0.3mm); no mechanical stress in the incision, no shear burr; high processing precision, good repeatability, no damage to the surface of the material; NC programming, can process any plan, can cut the whole board with large format, no need Open the mold, saving time and economy.
shipments