Cutting current
Increasing the cutting current also increases the power of the plasma arc, but it is limited by the maximum allowable current, otherwise the plasma arc column becomes thicker, the slit width increases, and the electrode life decreases.
Gas flow
Increasing the gas flow rate can increase the arc column voltage and enhance the compression of the arc column, so that the plasma arc energy is more concentrated and the ejection force is stronger, thereby improving the cutting speed and quality. However, if the gas flow rate is too large, the arc column will be shortened, and the loss of heat will increase, so that the cutting ability is weakened until the cutting process is not performed normally.
The numerical control and drive adopt modular integrated design, and the buttons and the chassis are completely shielded from all steel structure, anti-electromagnetic radiation and anti-static.
Features
Servo drive, high control precision, stable moment frequency characteristics, strong overload capability and fast response.
The numerical control and drive adopt modular integrated design, and the buttons and the chassis are completely shielded from all steel structures, preventing electromagnetic radiation and anti-static.
Double gun operation reduces labor costs by 50%.
Transportation and material costs are reduced by 10%.
High processing efficiency, 2.2 times that of single shot cutting.
Optional capacitor or plasma automatic height adjustment system to effectively avoid plate deformation wave deformation collision.
Imported electrical appliances, stable performance, anti-interference and long life.
Advantages: high efficiency and accuracy, high stable cutting quality Scope of application: carbon steel, galvanized sheet, stainless, aluminium plate, copper plate, manganese plate and metal sheet materials.
Machine structure
1. The frame adopts all-welded structure, which is firm and reasonable, easy to operate and durable.
2. Cutting speed and high precision. The cutting mouth is small, neat and has no slag. On the basis of the traditional numerical control system, the control method for cutting is improved, and the secondary dressing processing is avoided.
3. Suitable for low carbon steel, copper, iron, aluminum, galvanized, titanium and other metal plates.
4. The CNC system configuration is high. Automatic arc ignition, stable performance, the success rate of arc ignition is more than 99%.
