Cleaning the connecting thread of the torch
When replacing consumables or routine maintenance inspections, be sure to clean the internal and external threads of the torch and, if necessary, clean or repair the connecting threads.
Cleaning the contact surface of the electrode and the nozzle
In many torches, the contact surface of the nozzle and the electrode is a charged contact surface. If there is dirt on these contact surfaces, the torch will not work properly and should be cleaned with a hydrogen peroxide cleaning agent.
Check gas and cooling gas daily
Check the flow and pressure of the gas and cooling air flow daily. If the flow is found to be insufficient or leaking, stop immediately to eliminate the malfunction.
Avoid torch collision damage
In order to avoid damage to the torch collision, it should be properly programmed to avoid the system from overrunning. The installation of the anti-collision device can effectively avoid the damage of the torch during the collision.
Features
Transportation and material costs are reduced by 10%.
High processing efficiency, 2.2 times that of single shot cutting.
Optional capacitor or plasma automatic height adjustment system to effectively avoid plate deformation wave deformation collision.
Imported electrical appliances, stable performance, anti-interference and long life.
Servo drive, high control precision, stable moment frequency characteristics, strong overload capability and fast response.
The numerical control and drive adopt modular integrated design, and the buttons and the chassis are completely shielded from all steel structures, preventing electromagnetic radiation and anti-static.
Double gun operation reduces labor costs by 50%.
Advantages: high efficiency and accuracy, high stable cutting quality
Scope of application: carbon steel, galvanized sheet, stainless, aluminium plate, copper plate, manganese plate and metal sheet materials.
The essence of the working process of the plasma device is as follows: An arc is generated between the inner nozzle (anode) of the gun and the electrode (cathode), so that the moisture between them is ionized to reach the state of the plasma. At this time, the ionized vapor is ejected into the nozzle in the form of a plasma jet by the pressure generated internally, and the temperature is about 8 000 ° C. This cuts, welds, welds and other forms of heat treatment of non-combustible materials.
Machine structure
1. The frame adopts all-welded structure, which is firm and reasonable, easy to operate and durable.
2. Cutting speed and high precision. The cutting mouth is small, neat and has no slag. On the basis of the traditional numerical control system, the control method for cutting is improved, and the secondary dressing processing is avoided.
3. Suitable for low carbon steel, copper, iron, aluminum, galvanized, titanium and other metal plates.
4. The CNC system configuration is high. Automatic arc ignition, stable performance, the success rate of arc ignition is more than 99%.