VIDEO
1. Advantages of fiber laser cutting A Fiber Laser Cutting Machine Laser Cutting Machine The fiber laser is a new type of fiber laser that is newly developed in the world to output a high energy density laser beam, which is concentrated on the surface of the workpiece, so that the area irradiated by the ultrafine focus spot on the workpiece is instantly melted and vaporized, and the spot is moved by the numerical control mechanical system. Automatic cutting is achieved by illuminating the position. Compared with large-volume gas lasers and solid-state lasers, it has obvious advantages and has gradually become an important candidate in high-precision laser processing, laser radar systems, space technology, laser medicine and other fields. The fiber laser Cutting Machine 2. Advantages of fiber laser cutting machine compared with Co2 Laser Cutting Machine 1) Excellent beam quality: smaller focusing spot, finer cutting lines, higher work efficiency and better processing quality; 2) Extremely high cutting speed: twice the same power CO2 laser cutting machine; 3) High stability: high quality imported fiber laser, stable performance, and the service life of key components can reach 100,000 hours; 4) Extremely high electro-optic conversion efficiency: The photoelectric conversion efficiency of the fiber laser cutting machine is about 30%, which is 3 times higher than the CO2 laser cutting machine, energy saving and environmental protection; 5) Very low cost of use: the power consumption of the whole machine is only 20-30% of the same CO2 laser cutting machine; 6) Very low maintenance cost: no laser working gas; fiber transmission, no need for reflective lenses; can save a lot of maintenance costs; 7) Convenient operation and maintenance of the product: optical fiber transmission, no need to adjust the optical path; 8) Super flexible light guiding effect: compact size, compact structure and easy flexible processing requirements. Compared to carbon dioxide laser cutting machines, the cutting range of optical fibers is relatively narrow. Because of the wavelength, it can only cut metal materials, and it is not easily absorbed by non-metals, thus affecting the cutting range.
I. Parameters
Type
CE3015
CE4015
CE6015
Effective Cutting Width (mm)
1500
1500
1500
Effective Cutting Length (mm)
3000
4000
6000
Lift(mm)
0-80
Input power
AC380V/50Hz;AC220V/50Hz
Cutting thickness (mm)
Stainless 6mm, carbon steel 14mm
Cutting speed ( mm/min )
28000 (15000W/δ1mm Stainless )
Idle speed ( mm/min )
100000
Max acceleration (G)
1.2
Position repeat accuracy
±0.05
Drive mode
Precision rack bilateral drive
Laser wavelength(nm)
1080
cooling mode
water-cooling
Environment temperature
5-35℃
Cutting material
Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet
II. The scope of Bond laser cutting machine:
Applicable to all kinds of metal plates: steel plate, carbon steel plate, stainless steel plate (304/201/306, etc.), galvanized sheet, aluminum sheet, copper sheet, iron sheet, cold rolled sheet, alloy sheet, silicon steel sheet and other metal sheet cutting;
In addition to improving the quality of processed products and shortening the production cycle, our products have 7 major advantages:
1. Easy operation and maintenance:
The system is highly integrated, easy to operate and maintain, and can meet the 24-hour production needs;
2. Intelligent adjustment of the laser head:
Our laser cutting head has the function of up and down stretching, which can automatically adjust the height of the laser cutting head according to the thickness of the plate and the height of the cutting table;
3. Small footprint:
Our equipment WIFI controller can be placed separately from the bed equipment to save floor space;
4. Long service life:
The laser head is protected by a high-temperature, high-quality PC protective case to extend the life of the laser head.
The rack and guide rail adopts full sealing protection and automatic lubrication device to improve the service life of the transmission parts and ensure the cutting precision of the machine tool.
The bed is equipped with a reasonable table top knife layout, which reduces the damage to the bed. The maximum DA limit guarantees the service life of the bed;
5. Efficient and environmentally friendly, in line with new environmental regulations:
The equipment is equipped with laser protective glass, which is effective in reducing damage to the human body;
The operation is non-polluting, does not produce pollution, noise, meets environmental protection requirements, and has great environmental protection significance.
6. Save mold costs and reduce production costs
It can easily cut workpieces of different shapes and sizes, without using molds, and without repairing molds, which not only saves processing costs, reduces production costs, but also saves time for mold replacement.
7. Can process any graphic to achieve no deformation cutting
It has good processing flexibility and can process any pattern. It can cut deformation of any hardness material such as pipe, profile, steel plate, stainless steel, aluminum alloy plate and hard alloy.
shipments
