Any equipment will have different degrees of damage during use, so what problems will the CNC Flame Cutting Machine encounter during its use? Blol intelligence summed up a few points. 1. Carbon steel plate perforation problem The piercing time accounts for a large proportion of the processing of thick plates. Various manufacturers have developed rapid perforation techniques that are more representative of high energy perforations (deep holes). The advantage of this method is the fast speed (1 sec, t16 mm)), which not only affects the processing of small shapes, but also the enormous energy injected during the perforation causes the temperature of the sheet to rise and affect the subsequent overall cutting process. A small power pulse for perforation, which is very long (12 seconds), which results in reduced cutting efficiency and increased unit cost.
2. Cutting surface quality problem
When the CNC flame Cutting Machine is used, the cutting section often appears. Not only is the quality of such cut products questioned, but it is accompanied by over-burning and severe slag, so that the value of CNC machining is different from other cutting methods.
3. Whole board processing stability problem
When processing the entire steel sheet, local processing defects often occur. This phenomenon sometimes occurs even if the machine is in good condition.
Shandong Buluorr Intelligent Technology Co., Ltd. specializes in R&D, manufacturing, sales and service of CNC Plasma Cutting Machine, CNC flame cutting machine, Laser Cutting Equipment, welding equipment, CNC system and functional components.