Sheet metal laser cutting machines are notoriously fast in processing sheet metal, and the processing quality is good! Generally speaking, the thinner the metal plate is processed by the Laser Cutting Machine, the easier it is. Is this really the case? Let's analyze the Buluoer Laser for everyone.
For the laser Cutting Machine, cutting 1mm sheet metal is relatively easy, and the cutting speed is still very fast. It is also very simple and trouble-free in processing operations! However, cutting 0.08mm thin plates is not so simple. Although cutting the upper part is very easy, in actual operation, because the plate is too thin, the remaining material is easy to lift up, which affects the cutting accuracy. If you rely on manual processing according to the remaining materials, it is also thankless, time-consuming and labor-intensive!
Some people may think that it would be better if several thin plates are stacked together for processing! Theoretically, it can be realized, but if it is actually operated, there will be a more fatal problem, that is accuracy! For the surface plate, the accuracy is achieved, but for the bottom plate, the waste residue will remain on the surface, and the accuracy will be greatly reduced.
Therefore, for the laser cutting machine, it is not that the thinner the sheet metal is, the better the laser cutting machine processing!
This article is from Shandong Buluoer Intelligent Technology Co., Ltd. Please indicate the source for reprinting!
(www.blrcnclaser.com)
