Shandong Buluoer Intelligent Technology Co., Ltd.

Co2 Laser Cutting Machine

Payment Type:
L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm:
FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order:
1 Set/Sets
Transportation:
Ocean
Port:
Qingdao Port
Share:
Chat Now
  • Product Description
Overview
Product Attributes

Model No.CP-4020

BrandBuluoer

CertificationISO 9001:2008

Suitable forOther

ConditionNew

AutomationAutomatic

Range Of Vertical Stroke 0-80mmInput Power AC380V/50Hz;AC220V/50Hz

Maximum Acceleration (G) 1.2Position Repeat Accuracy ±0.05mm

Effective Cutting Width 2000mmEffective Cutting Length 4000mm

Supply Ability & Additional Information

PackagingSteel box

TransportationOcean

Place of OriginJi'nan City, Shandong Province, China

CertificateISO 9001

PortQingdao Port

Payment TypeL/C,T/T,D/P,Paypal,Money Gram,Western Union

IncotermFOB,CFR,CIF,EXW,FCA,CPT,CIP

Packaging & Delivery
Selling Units:
Set/Sets
Package Type:
Steel box

                                                                    


The laser, like any other electromagnetic wave transmission, also has electrical and magnetic vectors that are perpendicular to each other in two directions and both are orthogonal to the laser transmission direction. It is generally believed that the direction of the electrical vector is the polarization direction of the beam. The polarization of the beam affects the absorption of the beam energy by the material. Cutting parallel to the direction of polarization of the beam results in a narrow cut and its edges are smooth and flat. If the cutting direction is at an angle to the plane of polarization, the energy absorption is reduced and the cutting speed is slowed. The slit is widened and the edge is rough and not at right angles to the surface of the material. Once the cutting direction is perpendicular to the polarization direction, the edges are not rough but the cutting speed is slower and the rupture is wider. The cutting quality is significantly reduced. Although it is required in principle, it is difficult to keep the cutting direction parallel to the polarization direction during multi-axis motion. A phase delay is provided to overcome this instability. Studies have shown that circularly polarized light is best suited for cutting metals. Most lasers produce polarized light at 45 degrees from the vertical. The phase delay converts this linearly polarized light into circularly polarized light. This method is effective for cutting metals but does not work for other materials such as plastics and wood.




cutting sample47cutting sample18

Enclosed machine with exchangeable table. That more safety. Meantime, it can greatly save your energy and time, with high quality, high seep and high cutting accuracy.It is professional in cutting varies metal sheets. Such as stainless steel, carbon steel, mild steel, iron, galvanized steel, titanium steel, silicon steel, brass, aluminum, titanium alloy, brass, copper, silver, gold, etc.Because of the machine widely application and high quality cutting performance. It is widely used in many kinds industries and daily life. Such as the machine manufacture industry, elevator industry, auto parts making, electrical parts making, locomotive manufacturing, agriculture and forestry machinery making, special vehicles, household appliances, tools, IT industry, kitchen supplies, decorations, craft, jewelry, etc.

Full closed protection improves using security; laser protection glass isolates laser radiation to human beings; automatic collection system of smokes and dusts is environment friendly; intelligent monitoring system reduces accident rate, making us enjoy beauty and health in cutting process.


cutting sample56

The cutting quality is good, the deformation is small, the appearance is smooth and beautiful.

The use of imported guide transmission mechanism and servo motor, cutting precision.

Can design any kind of graph or text to cut at will, the operation is simple, flexible, convenient.

The closed Fiber Laser Cutting Machine has low cost and consumes less power,it can blow air to cut all kinds of metal sheets

High performance, imported fiber laser, stable performance, long service life.

High speed, high efficiency, up to 100 meters per minute.


Fully Enclosed Fiber Laser


The Environment-friendly Protective Cover type Optical Fiber Laser Cutting Machine adopts international advanced optical fiber lasers, has stable performance, can reduce environmental pollution, can cut various metal plates, and is mainly suitable for fast cutting of stainless steel, carbon steel, manganese steel, copper plate, galvanized plate, various alloy plates, rare metals and other materials. Applicable industries: sheet metal, mechanical equipment, precision instruments, metal molds, auto parts, kitchen and toilet products, lighting, mobile phone communication, digital products, electronic components, clocks and watches, computer accessories, instruments, jewelry, glasses, craft gifts, etc.

Envrioment Protection Laser Cutting Machine1

Advantages

1.Full enclosed protective cover,Guaranteeing the separation of operator and machine,Dust proof Environmental

2. Carbon steel plate welding, structural stability, high temperature annealing

3. Five-axis center finishing, high strength and good rigidity

4. Integral cast aluminum beam, light weight, corrosion resistance, oxidation resistance, low density

5. Automatic focus adjustment, no manual

Characteristics

1.Stability and reliability of light path system and control system.

2.Imported original fiber lasers,high and stable function,lifespan is over 100000 hours.

3.Higher cutting quality and efficiency ,cutting speed is up to 80m/min with appearance and beautiful cutting edge.

4.German high performance reducer,gear and rack;Japanese guide and  all screw.

5.Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed, it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.

Environmental protection cutting machine local

Features

• Closed enclosure provides a protective safety working environment without any dust and smoke.
• Integral heavy gantry structure machine, High strength cast aluminum beams, good rigidity with stable performance.
• Import high-precision transmission perfect matches with servo system to ensure cutting accuracy and efficiency.

• The high speed exchangeable working table as an option to simplify the workflow and save time.


Cutting head

Precitec is the specialist for laser material processing and optical measuring technology. Flatbed cutting or 2D cutting is the most widely used application in laser cutting. Standard machines are equipped with three axes: two positioning axes for traversing the desired cutting contour and a Z-axis for adjusting the distance between the workpiece and the cutting head. In addition to conventional CO2 lasers cutting systems, predominantly fiber-guided solid-state lasers (fiber lasers and disk lasers) are used as the beam source. 2D laser cutting systems process flat materials of various thicknesses made of steel, stainless steel, aluminum or non-ferrous metals with great dynamics and high cutting speeds. In particular, small and medium lot sizes are produced with superior cost-effectiveness and flexibility.

Cutting headCutting head2






Product Categories : Industry Applications Cutting Machine > Environmental Protection Equipment Cutting Machine

Email to this supplier
  • *Subject:
  • *To:
    Ms. Alisa Yu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send