As we all know, the CNC Plasma Cutting Machine is an important tool for cutting metal sheets, not only the Cutting Machine has high precision and cutting speed. Only the cutting thickness will not exceed 30mm, so why can't Cnc Plasma Cutting Machine cut thick plates?
The Blol CNC Plasma Cutting Machine uses an air plasma generator as a plasma cutting source. Copper, aluminum, etc. are highly reflective materials (materials that do not easily absorb the wavelength of a CNC plasma cutting machine). Due to wavelength limitation, it is impossible to cut thick copper. Materials such as aluminum, even long-term cutting of this type of highly reflective material, can damage the plasma generator and reduce the overall performance of the CNC plasma cutting machine.
Why can't you cut thick plates for materials that easily absorb the wavelength of the CNC plasma, such as stainless steel and carbon steel? The reasons are as follows:
1. The temperature at the cutting front is low. Due to the cooling of the cutting crack caused by the auxiliary gas oxygen sprayed from the nozzle, the deformation of the cutting crack can be prevented from affecting the workpiece, and the temperature of the cutting front is also affected, so that the thicker sheet cannot be melted, and the cutting or cutting deformation cannot be realized.
2. The auxiliary gas oxygen also has a combustion-supporting effect. During the cutting process, the workpiece chemically reacts with oxygen to form a ferrous oxide layer, so that the surface of the workpiece is covered, so that the diffusion of oxygen is hindered, so that the concentration of oxygen on the cutting surface is reduced to When it is lowered to a certain extent, the burning point of the cutting is suddenly extinguished and cannot be cut, so that the thick plate cannot be processed.
3. The principle of the CNC plasma cutting machine is that plasma cutting is a processing method that uses the heat of a high-temperature plasma arc to melt or partially melt (and evaporate) the metal portion of the workpiece incision, and remove the molten metal by the momentum of high-speed plasma to form a slit. As the thickness of the cutting material increases, the bottom temperature is insufficient to form a through cut.
In order to ensure the safe production of CNC Flame Cutting Machine, Blol intelligently reminds operators of the safety protection measures that must be done:
1. The operator must receive special qualification training according to the regulations and obtain the corresponding qualification certificate;
2. Check the electricity/air source, water source, electricity/air pressure before operation (when the output pressure of the oxygen cylinder is lower than 0.1MPa, replace the new gas in time), and whether the PE line is normal;
3. Check whether there are inflammable or explosive materials (including pipelines with inflammable and explosive gases) within 10 meters on both sides of the guide rail near the equipment;
4. The operator must wear personal protective equipment - work clothes, protective glasses, respirators, etc.;
5, the operator must strictly abide by the general welder, manual gas welding (cutting) safety operation procedures and safety rules for rubber hoses, oxygen cylinders, various industrial cutting cylinders and torch safety operating rules;
It can improve the cutting efficiency and cutting quality of the board and reduce the labor intensity of the operator.
It is the high efficiency flame cutting equipment that adopted the CNC cutting system. Multiple equal slots can be cut at one time and be widely used in steel structure industry with slat cutting. It is a kind of ideal equipment for steel structure plate making.
Multiple guns straight line cutting at same time, cutting efficiency is high.
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can achieve the synchronous artificial seat, reduce the labor intensity and reduce the labor fatigue.
Can remote operation, convenient and efficiency, save labor.
Automatic temper control, safety and efficiency.